NJ8-18GM-N-5M - Inductive sensor | NJ8-18GM-N-5M - Quad Industry GmbH
Артикул: NJ8-18GM-N-5M
Наименование: Inductive sensor | NJ8-18GM-N-5M
Производитель: Pepperl-Fuchs
|
|
- 8 mm non-flush
- Usable up to SIL2 acc. to IEC 61508
Datasheet as PDF in following languages: Technical Data: NJ8-18GM-N-5M| General specifications | | Switching element function | NAMUR, NC | | Rated operating distance | 8 mm | | Installation | non-flush | | Output polarity | NAMUR | | Assured operating distance | 0 ... 6.48 mm | | Reduction factor rAl | 0.4 | | Reduction factor rCu | 0.3 | | Reduction factor r304 | 0.85 | | Nominal ratings | | Nominal voltage | 8 V | | Switching frequency | 0 ... 200 Hz | | Hysteresis | typ. % | | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Approvals and certificates | | FM approval | | | Control drawing | 116-0165F | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Mechanical specifications | | Connection type | cable PVC , 5 m | | Core cross-section | 0.75 mm2 | | Housing material | Stainless steel 1.4305 / AISI 303 | | Sensing face | PBT | | Housing diameter | 18 mm | | Protection degree | IP67 | | General information | | Use in the hazardous area | see instruction manuals | | Category | 1G; 2G; 1D |
|
Назад в раздел
|
