NJ6S1+U1+N1 - Inductive sensor | NJ6S1+U1+N1 - Quad Industry GmbH
Артикул: NJ6S1+U1+N1
Наименование: Inductive sensor | NJ6S1+U1+N1
Производитель: Pepperl-Fuchs
|
|
- 6 mm flush in ST37 / 1.0037
- Usable up to SIL 3 acc. to IEC 61508
Datasheet as PDF in following languages: Technical Data: NJ6S1+U1+N1| General specifications | | Switching element function | NAMUR, NO | | Rated operating distance | 6 mm | | Installation | flush | | Output polarity | Safety Function | | Assured operating distance | 0 ... 4.86 mm | | Reduction factor rAl | 1 | | Reduction factor rCu | 1 | | Reduction factor r304 | 0 | | Nominal ratings | | Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | | Switching frequency | 0 ... 100 Hz | | Current consumption | | | Measuring plate not detected | ≤ 1 mA | | Measuring plate detected | ≥ 3 mA | | Functional safety related parameters | | MTTFd | 9190 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Approvals and certificates | | FM approval | | | Control drawing | 116-0165F | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Mechanical specifications | | Connection type | screw terminals | | Core cross-section | up to 2.5 mm2 | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP68 | | Note | only for non-ferrous metal | | General information | | Use in the hazardous area | see instruction manuals | | Category | 1G; 2G; 1D |
|
Назад в раздел
|
