NJ6-22-N-G-15M - Inductive sensor | NJ6-22-N-G-15M - Quad Industry GmbH
Артикул: NJ6-22-N-G-15M
Наименование: Inductive sensor | NJ6-22-N-G-15M
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 6 mm flush
- Usable up to SIL2 acc. to IEC 61508
Datasheet as PDF in following languages: Technical Data: NJ6-22-N-G-15MGeneral specifications | Switching element function | NAMUR, NC | Rated operating distance | 6 mm | Installation | flush | Output polarity | NAMUR | Assured operating distance | 0 ... 4.86 mm | Reduction factor rAl | 0.4 | Reduction factor rCu | 0.3 | Reduction factor r304 | 0.85 | Nominal ratings | Nominal voltage | 8 V | Switching frequency | 0 ... 2000 Hz | Hysteresis | typ. % | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | Compliance with standards and directives | Standard conformity | | | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | Mechanical specifications | Connection type | cable PVC , 15 m | Core cross-section | 0.75 mm2 | Housing material | Stainless steel 1.4305 / AISI 303 | Sensing face | PBT | Housing diameter | 21 mm | Protection degree | IP68 | General information | Use in the hazardous area | see instruction manuals | | Category | 2G; 3G; 3D |
|
Назад в раздел
|