NJ4-N-H31 - Inductive sensor | NJ4-N-H31 - Quad Industry GmbH
Артикул: NJ4-N-H31
Наименование: Inductive sensor | NJ4-N-H31
Производитель: Pepperl-Fuchs
|
|
- Temperature range
0 ... 200 В°C (0 ... 392 В°F) - 4 mm flush
Datasheet as PDF in following languages: Technical Data: NJ4-N-H31General specifications | Switching element function | NAMUR, NC | Rated operating distance | 4 mm | Installation | flush | Output polarity | NAMUR | Assured operating distance | 0 ... 3.04 mm | Reduction factor rAl | 0.4 | Reduction factor rCu | 0.3 | Reduction factor r304 | 0.85 | Nominal ratings | Nominal voltage | 8 V | Switching frequency | 1000 Hz | Hysteresis | ≤ 20 % at 200В°C | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | Compliance with standards and directives | Standard conformity | | | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | 0 ... 200 В°C (32 ... 392 В°F) | Mechanical specifications | Connection type | cable PVC , 10 m | Core cross-section | 0.34 mm2 | Housing material | Stainless steel 1.4305 / AISI 303 | Sensing face | PPS | Housing diameter | 28 mm | Housing length L | 40 / 50 / 60 / 80 / 100 [mm] | Protection degree | IP65 | Cable length LK | 0,5 / 0,75 / 1 / 2 / 3 / 4 / 6 / 8 / 10 [m] | Note | amplifier -25В°C...70В°C PTFE cable between amplifier and oscillator |
|
Назад в раздел
|