NJ4-30GM-N-200 - Inductive sensor | NJ4-30GM-N-200 - Quad Industry GmbH
Артикул: NJ4-30GM-N-200
Наименование: Inductive sensor | NJ4-30GM-N-200
Производитель: Pepperl-Fuchs
|
|
- 4 mm flush
- Temperature range
0 ... 200 В°C (0 ... 392 В°F)
Datasheet as PDF in following languages: Technical Data: NJ4-30GM-N-200| General specifications | | Switching element function | NAMUR, NC | | Rated operating distance | 4 mm | | Installation | flush | | Output polarity | NAMUR | | Assured operating distance | 0 ... 3.04 mm | | Reduction factor rAl | 0.4 | | Reduction factor rCu | 0.3 | | Reduction factor r304 | 0.85 | | Nominal ratings | | Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | | Switching frequency | 0 ... 1000 Hz | | Hysteresis | typ. % | | Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | | Functional safety related parameters | | MTTFd | 9700 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Approvals and certificates | | FM approval | | | Control drawing | 116-0165F | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | 0 ... 200 В°C (32 ... 392 В°F) | | Mechanical specifications | | Connection type | cable SIHF , 5 m | | Core cross-section | 0.34 mm2 | | Housing material | Stainless steel 1.4305 / AISI 303 | | Sensing face | PPS | | Housing diameter | 30 mm | | Protection degree | IP65 | | Note | amplifier -25В°C...70В°C
2 m PTFE cable between amplifier and oscillator | | General information | | Use in the hazardous area | see instruction manuals | | Category | 1G; 2G |
|
Назад в раздел
|
