NJ15-30GM50-E2-V1 - Inductive sensor | NJ15-30GM50-E2-V1 - Quad Industry GmbH
Артикул: NJ15-30GM50-E2-V1
Наименование: Inductive sensor | NJ15-30GM50-E2-V1
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 15 mm non-flush
Datasheet as PDF in following languages: Technical Data: NJ15-30GM50-E2-V1General specifications | Switching element function | PNP NO | Rated operating distance | 15 mm | Installation | non-flush | Output polarity | DC | Assured operating distance | 0 ... 12.15 mm | Reduction factor rAl | 0.4 | Reduction factor rCu | 0.38 | Reduction factor r304 | 0.71 | Reduction factor rBrass | 0.45 | Nominal ratings | Operating voltage | 10 ... 60 V | Switching frequency | 0 ... 500 Hz | Hysteresis | 1 ... 15 typ. 5 % | Reverse polarity protection | reverse polarity protected | Short-circuit protection | pulsing | Voltage drop | ≤ 2.8 V | Operating current | 0 ... 200 mA | Off-state current | 0 ... 0.5 mA typ. 0.01 mA | No-load supply current | ≤ 9 mA | Switching state indication | LED, yellow | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | Certified by China Compulsory Certification (CCC) | Ambient conditions | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) | Mechanical specifications | Connection type | Connector M12 x 1 , 4-pin | Housing material | Stainless steel 1.4305 / AISI 303 | Sensing face | PBT | Housing diameter | 30 mm | Protection degree | IP67 |
|
Назад в раздел
|