NJ1,5-8GM-N-10M - Inductive sensor | NJ1,5-8GM-N-10M - Quad Industry GmbH
Артикул: NJ1,5-8GM-N-10M
Наименование: Inductive sensor | NJ1,5-8GM-N-10M
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- Usable up to SIL2 acc. to IEC 61508
Datasheet as PDF in following languages: Technical Data: NJ1,5-8GM-N-10MGeneral specifications | Switching element function | NAMUR, NC | Rated operating distance | 1.5 mm | Installation | flush | Output polarity | NAMUR | Assured operating distance | 0 ... 1.215 mm | Reduction factor rAl | 0.4 | Reduction factor rCu | 0.3 | Reduction factor r304 | 0.85 | Nominal ratings | Nominal voltage | 8 V | Switching frequency | 0 ... 5000 Hz | Hysteresis | typ. % | Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | Compliance with standards and directives | Standard conformity | | | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | Mechanical specifications | Connection type | cable PVC , 10 m | Core cross-section | 0.14 mm2 | Housing material | Stainless steel 1.4305 / AISI 303 | Sensing face | PBT | Housing diameter | 8 mm | Protection degree | IP67 | General information | Use in the hazardous area | see instruction manuals | | Category | 1G; 2G |
|
Назад в раздел
|