NCN40+U4+N0-V1 - Inductive sensor | NCN40+U4+N0-V1 - Quad Industry GmbH
Артикул: NCN40+U4+N0-V1
Наименование: Inductive sensor | NCN40+U4+N0-V1
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 40 mm non-flush
Datasheet as PDF in following languages: Technical Data: NCN40+U4+N0-V1| General specifications | | Switching element function | NAMUR, NC | | Rated operating distance | 40 mm | | Installation | non-flush | | Output polarity | NAMUR | | Assured operating distance | 0 ... 32.4 mm | | Reduction factor rAl | 0.45 | | Reduction factor rCu | 0.45 | | Reduction factor r304 | 0.8 | | Nominal ratings | | Installation conditions | | | A | 10 mm | | Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | | Switching frequency | 0 ... 100 Hz | | Hysteresis | 1 ... 15 typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | yes | | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | | Switching state indication | LED, yellow | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Approvals and certificates | | FM approval | | | Control drawing | 116-0165F | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Storage temperature | -40 ... 100 В°C (-40 ... 212 В°F) | | Mechanical specifications | | Connection type | Connector M12 x 1 , 4-pin | | Housing material | PBT/metal | | Sensing face | PBT | | Protection degree | IP68 | | General information | | Use in the hazardous area | see instruction manuals | | Category | 1G; 2G; 1D |
|
Назад в раздел
|
