General specifications |
Switching element function | DC Dual NC |
Rated operating distance | 3 mm |
Installation | flush mountable |
Output polarity | NAMUR |
Assured operating distance | 0 ... 2.43 mm |
Reduction factor rAl | 0.5 |
Reduction factor rCu | 0.45 |
Reduction factor r304 | 1 |
Reduction factor rSt37 | 1.1 |
Nominal ratings |
Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
Switching frequency | 0 ... 1500 Hz |
Hysteresis | typ. 5 % |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | yes |
Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
Current consumption | |
| Measuring plate not detected | ≥ 3 mA |
| Measuring plate detected | ≤ 1 mA |
No-load supply current | ≤ 3 mA |
Switching state indication | LED, yellow |
Functional safety related parameters |
MTTFd | 2075 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Compliance with standards and directives |
Standard conformity | |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| Electromagnetic compatibility | NE 21:2007 |
Approvals and certificates |
FM approval | |
| Control drawing | 116-0165F |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
Storage temperature | -40 ... 100 В°C (-40 ... 212 В°F) |
Mechanical specifications |
Connection type | Connector M12 x 1 , 4-pin |
Housing material | PBT |
Sensing face | PBT |
Protection degree | IP67 |
Tightening torque, fastening screws | M5 x 25 : 2.7 Nm |
Note | Mounted on mechanical drive |
General information |
Use in the hazardous area | see instruction manuals |
| Category | 1G; 2G; 3G |