NCN3-F25-N4-K1V1 - Inductive sensor | NCN3-F25-N4-K1V1 - Quad Industry GmbH
Артикул: NCN3-F25-N4-K1V1
Наименование: Inductive sensor | NCN3-F25-N4-K1V1
Производитель: Pepperl-Fuchs
|
|
- For installation in housing
Datasheet as PDF in following languages: Technical Data: NCN3-F25-N4-K1V1| General specifications | | Switching element function | DC Dual NC | | Rated operating distance | 3 mm | | Installation | flush mountable | | Assured operating distance | 0 ... 2.43 mm | | Reduction factor rAl | 0.5 | | Reduction factor rCu | 0.4 | | Reduction factor r304 | 1 | | Reduction factor rSt37 | 1.2 | | Nominal ratings | | Nominal voltage | 8 V | | Switching frequency | 0 ... 1500 Hz | | Hysteresis | typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | yes | | Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | | Switching state indication | LED, yellow | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Electromagnetic compatibility | NE 21:2007 | | Approvals and certificates | | FM approval | | | Control drawing | 116-0165F | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Storage temperature | -40 ... 100 В°C (-40 ... 212 В°F) | | Mechanical specifications | | Connection type | V1 connector | | Core cross-section (system side) | 0.14 mm2 | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP67 | | Tightening torque, fastening screws | M5 x 25 : 2.7 Nm | | Note | Bopla PG screwed connection | | General information | | Use in the hazardous area | see instruction manuals | | Category | 1G; 2G |
|
Назад в раздел
|
