RW95 - Awning control Rain sensor - Quad Industry GmbH

Артикул: RW95
Наименование: Awning control Rain sensor
Производитель: JUNG




Awning control

Rain sensor
Intended use
*     Sensor for detection and evaluation of precipitation
*     In connection with blind/shutter controllers, enables, e.g. the retraction of awnings when it begins to rain.
*     Surface-mounted device for outdoor installation


Product characteristics
*     Serpentine-shaped sensor surface detects wetting due to precipitation.
*     Change-over relay remains switched on until the sensor is dry again. For at least 10 minutes.
*     Integrated heater speeds up the drying of the sensor surface and melts snow and ice.

Technical data
Rated voltage: AC 230 V ~, 50/60 Hz
Current consumption: 15 mA (with preheating)
Power consumption: max. 4.5 W (incl. auxiliary heating)
Switch-off delay: approx. 10 min
Relay output
dry: contact open
rain: contact closed
Relay switching capacity: max. 1500 W (resistive load)
Relay contact rating: (µ) 6 A / AC 250 V ~
Ambient temperature: ?30 ... +50 °C
Protection class: II
Protection level: IP 65
Connecting cable: flexible PVC cord,
2.9 m, JZ-600, 3 x 0.75 mm?
2.9 m, JZ-600, 2 x 0.75 mm?
Dimensions: 130 x 90 x 90 mm (incl. fitting bracket)
Weight: approx. 600 g (incl. fitting bracket)
Mounting position: fixed by 110° fitting bracket

Manufacturer: JUNG
Ref.-no.: RW 95

Назад в раздел