FMUD420250REG - eNet eNet radio dimming actuator 4-gang, for rail mounting Rail mounting device, 8 rail units New system feature: Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0 - Quad Industry GmbH

Артикул: FMUD420250REG Наименование: eNet eNet radio dimming actuator 4-gang, for rail mounting Rail mounting device, 8 rail units New system feature: Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0 Производитель: JUNG eNet eNet radio dimming actuator 4-gang, for rail mounting Rail mounting device, 8 rail units New system feature: Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0 Technical data Rated voltage: AC 230 V ~, 50/60 Hz Power loss: max. 8 W Stand-by power: max. 1.2 W Ambient temperature: ?5 ... +45 °C Connected load per output at 45 °C Power specifications including transformer power dissipation. Operate inductive transformers with at least 85 % nominal load. For ohmic-inductive mixed load, maximum 50 % proportion of ohmic load. Otherwise incorrect calibration of the dimmer may result. Max. load for outputs connected in parallel is limited to 95 %. The minimum load of parallel switching of load outputs is 250 VA. Incandescent lamps: 20 ... 250 W HV halogen lamps: 20 ... 250 W Electronic transformers: 20 ... 250 W Inductive transformers: 20 ... 250 VA Dimmable HV LED lamps: typical 3 ... 50 W Dimmable compact fluorescent lamps: typical 3 ... 50 W Ohmic-inductive: 20 ... 250 VA Ohmic-capacitive: 20 ... 250 W Capacitive-inductive: not permitted Amplifiers: see instructions for amplifier Connection, outputs: screw terminals single wire: 1.5 ... 4 mm2 stranded without ferrule: 0.75 ... 4 mm2 stranded with ferrule: 0.5 ... 2.5 mm2 Contact type: ? Length of output cable, per channel: max. 100 m Mounting width: 144 mm (8 rail units) Bus line Rated voltage: DC 12 V SELV Current consumption: 10 mA Connection bus: terminal Cable length: max. 3 m Manufacturer: JUNG Ref.-no.: FM UD 420250 REG

Назад в раздел