ГлавнаяКаталогjung254254U254UDI
 

254UDIE1 - Universal rotary dimmer insert 50 – 420 W/VA incremental control without end position - Quad Industry GmbH

Артикул: 254UDIE1
Наименование: Universal rotary dimmer insert 50 – 420 W/VA incremental control without end position
Производитель: JUNG




Universal rotary dimmer insert 50 – 420 W/VA
incremental control without end position

Intended use
*     Switching and dimming of incandescent lamps, HV halogen lamps and dimmable inductive transformers or TRONIC transformers with halogen lamps
*     Suitable for mixed operation up to the specified output
*     Installation in appliance box according to DIN 49073


Product characteristics
*     Connection of multiple dimmer satellites is possible
*     Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
*     Electronic overtemperature protection
*     Lamp-saving soft start
*     Power extension through amplifiers
*     Automatic setting of the dimming principle suitable for the load
*     With push switch

Technical data
Rated voltage: AC 230 V ~, 50/60 Hz
Ambient temperature: +5 ... +25 °C
Connected load at 25 °C
Power specifications including transformer power dissipation.
Operate inductive transformers with at least 85 % nominal load.
For ohmic-inductive mixed load, maximum 50 % proportion of ohmic load. Otherwise incorrect calibration of the dimmer may result.
Incandescent lamps: 50 ... 420 W
HV halogen lamps: 50 ... 420 W
Electronic transformers: 50 ... 420 W
Inductive transformers: 50 ... 420 VA
Ohmic-inductive: 50 ... 420 VA
Ohmic-capacitive: 50 ... 420 W
Capacitive-inductive: not permitted
Reduction of load for every 5 °C exceededing 25 °C: ?10 %
for installation into wooden or hollow walls: ?15 %
for installation into multiple combinations: ?20 %
Amplifiers: see instructions for amplifier
Connection
single wire: 1 ... 2.5 mm2
Number of satellite units: 5
Total length of extension unit cable: max. 100 m
Total length power cable: max. 100 m

Manufacturer: JUNG
Ref.-no.: 254 UDIE1

Назад в раздел