2504REGHER - KNX Devices
Shutter actuator 4-gang AC 110-230 V
Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
ETS product family: Shutter
Product type: Shutter - Quad Industry GmbH
Артикул: 2504REGHER
Наименование: KNX Devices
Shutter actuator 4-gang AC 110-230 V
Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
ETS product family: Shutter
Product type: Shutter
Производитель: JUNG
|
|
KNX Devices
Shutter actuator 4-gang AC 110-230 V
Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
ETS product family: Shutter
Product type: Shutter
Product characteristics
* Outputs can be operated manually, construction site mode
* Blind/shutter position directly controllable
* Acknowledgement of the blind/shutter position in bus and manual mode
* Safety functions: 3 independent wind alarms, rain alarm, frost alarm
* Integration into the temperature management of the building
* Disabling of individual outputs manually or via bus
* No central function
* No end position detection
* No feedback for drive movement
* No sun protection
* No scene function
* No forced position
* No fabric-stretching
Technical data
Rated voltage: AC 110 V (?10 %) ... 240 V (+10 %)
Mains frequency: 50 / 60 Hz
Switching voltage: AC 250 V ~
Switching current AC 250 V: 6 A
Switching current DC 12/24 V: 6 A
Switching current DC 48 V: 3 A
Connection, power supply and load: screw terminals
single wire: 0.5 ... 4 mm2
stranded without ferrule: 0.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Max. blind/shutter running time: 20 min
Mounting width: 72 mm (4 rail units)
Ambient temperature: ?5 ... +45 °C
Storage/transport temperature: ?25 ... +70 °C
Power loss: max. 4.5 W
Rated voltage KNX: DC 21 ... 32 V SELV
Power consumption KNX: typical 150 mW
Connection, KNX: terminal
Approvals: VDE
Manufacturer: JUNG
Ref.-no.: 2504 REGHER
|
Назад в раздел
|