244HEX - Rotary dimmer insert 20 – 500 W/VA with 2-way push switch with potentiometer to adjust the minimum brightness - Quad Industry GmbH

Артикул: 244HEX
Наименование: Rotary dimmer insert 20 – 500 W/VA with 2-way push switch with potentiometer to adjust the minimum brightness
Производитель: JUNG




Rotary dimmer insert 20 – 500 W/VA
with 2-way push switch

with potentiometer to adjust the minimum brightness

Intended use
*     Switching and dimming of incandescent lamps, HV halogen lamps as well as dimmable inductive transformers with halogen or LED lamps.
*     Switching and dimming of dimmable HV-LED lamps or compact fluorescent lamps
*     No mixed-load operation of HV LED and compact fluorescent lamps. All other specified load types can be used in mixed-load operation.

*     Installation in flush-box according to DIN 49073


Product characteristics
*     Dimming method: leading edge phase control
*     Short-circuit protection through fine-wire fuse
*     Electronic overtemperature protection
*     Satellite switching possible in combination with 2-way switch
*     Operation on 60 Hz mains possible
*     Suitable amplifiers: ULZ 1215 REG and 246 EB (max. 10)
When using 246 EB, charge dimmer with minimum capacity!

Technical data
Rated voltage: AC 230/240 V ~
Mains frequency: 50 / 60 Hz
Ambient temperature: +5 ... +25 °C
Connected load at 25 °C
Operate inductive transformers with at least 85 % nominal load.
Power specifications including transformer power dissipation.
Incandescent lamps: 20 ... 500 W
HV halogen lamps: 20 ... 500 W
Dimmable HV LED lamps: typical 3 ... 100 W
Dimmable compact fluorescent lamps: typical 3 ... 100 W
Inductive transformers: 20 ... 500 VA
Reduction of load
for every 5 °C exceededing 25 °C: ?10 %
for installation into wooden or hollow walls: ?15 %
for installation into multiple combinations: ?20 %
Connection: screw terminals
single wire: max. 4 mm2
Fine-wire fuse: T 3.15 A H 250 V
Approvals: VDE

Manufacturer: JUNG
Ref.-no.: 244 HEX

Назад в раздел