2424REGHE - KNX Devices Blinds actuator, 4-gang DC 12-48 V Rail mounting device, 4 rail units with manual electronic operation and LED status indication Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Shutter Product type: Shutter - Quad Industry GmbH

Артикул: 2424REGHE
Наименование: KNX Devices Blinds actuator, 4-gang DC 12-48 V Rail mounting device, 4 rail units with manual electronic operation and LED status indication Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Shutter Product type: Shutter
Производитель: JUNG




KNX Devices

Blinds actuator, 4-gang DC 12-48 V
Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Shutter
Product type: Shutter


Intended use
*     Switching of electrically driven blinds, shutters, awnings and similar hangings for AC 110-230 V mains voltage or DC 12-48 V extra-low voltage.
*     Mounting on DIN rail in distribution boxes


Product characteristics
*     Suitable for 110-230 V AC motors and 12-48 V DC motors
*     Automatic operation time detection for 230 V motors can be set
*     Slat position directly controllable
*     Acknowledgement of travelling state and slat position in bus and manual mode
*     Light scene function
*     Top and bottom forced position via higher-level controller
*     Sun protection function

Technical data
Outputs: 4 independent channels for one blind/shutter motor each
Contact type: floating make contact
Switching voltage DC: DC 12 ... 48 V
Breaking capacity DC 12 V: 6 A
Breaking capacity DC 24 V: 6 A
Breaking capacity DC 48 V: 3 A
Min. switching current DC: 100 mA
Connection: screw terminals
single wire: 0.5 ... 4 mm2
stranded without ferrule: 0.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2

Manufacturer: JUNG
Ref.-no.: 2424 REGHE

Назад в раздел