240-31 - Electronic potentiometer, 1 – 10 V
for dimming of fluorescent lamps controlled by electronic ballasts or
TRONIC transformers with control voltage 1 – 10 V
switching capacity of mains push-button:
AC 230 V ~ 50/60 Hz, max. 2 A for resistive loads - Quad Industry GmbH
Артикул: 240-31
Наименование: Electronic potentiometer, 1 – 10 V
for dimming of fluorescent lamps controlled by electronic ballasts or
TRONIC transformers with control voltage 1 – 10 V
switching capacity of mains push-button:
AC 230 V ~ 50/60 Hz, max. 2 A for resistive loads
Производитель: JUNG
|
|
Electronic potentiometer, 1 – 10 V
for dimming of fluorescent lamps controlled by electronic ballasts or
TRONIC transformers with control voltage 1 – 10 V
switching capacity of mains push-button:
AC 230 V ~ 50/60 Hz, max. 2 A for resistive loads
Intended use
* Switching and brightness adjustment for lamps with operating devices with 1-10 V interface
* Installation in appliance box according to DIN 49073
Product characteristics
* Potentiometer with switching function for direct switching of ohmic or inductive loads
* Potentiometer with push-button function only in connection with pulse relays
* Basic brightness adjustable
* For potentiometers with a push-button function, switching via extensions is possible
* Protection of the 1-10 V interface in case of incorrect connection by means of integrated fine-wire fuse
Technical data
Control voltage: 0.7 ... 12 V
Control current: max. 50 mA
Fuse, type: F 0.5 A H 250 V
Connection: screw terminals
Terminals for: 2 x 2.5 mm2 or 1 x 4 mm2
Control cable: Type, cross-section and laying for 250 V lines (control voltage with basic insulation).
Control and load wires may share a common cable, e.g. NYM J 5 x 1.5 mm2 .
Approvals: VDE
Version: with push-button function
Manufacturer: JUNG
Ref.-no.: 240-31
|
Назад в раздел
|