240-10EB - Push-button controller, built-in for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V operation by push-buttons (make contact), e.g. ref.-no. 531 U - Quad Industry GmbH

Артикул: 240-10EB Наименование: Push-button controller, built-in for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V operation by push-buttons (make contact), e.g. ref.-no. 531 U Производитель: JUNG Push-button controller, built-in for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V operation by push-buttons (make contact), e.g. ref.-no. 531 U Intended use *     Brightness setting for lamp operating devices with 1-10 V interface *     Installation in false ceilings or surface mounting Product characteristics *     The light bulb is switched on and off via the load cable and dimmed via the 1-10 V interface *     Operation via installation button, NO contact *     Can be switched to memory function with brightness memory *     The 1-10 V interface is short-circuit proof for the control current Technical data Rated voltage: AC 230 V ~, 50 Hz Switch contact: relay, mains potential Switching capacity: Ohmic load2300 W Electronic ballast, transformerdepending on type Control current of electronic ballast: max. 200 mA Short-circuit protection: line circuit breaker, max. 10 A Electrical isolation: 2 kV basic insulation Ambient temperature: max. 50 °C No-load protection: yes Connection: screw terminals single wire: max. 4 mm2 stranded without ferrule: max. 2.5 mm2 stranded with ferrule: max. 1.5 mm2 Dimensions: 175 x 42 x 18 mm Approvals: VDE Manufacturer: JUNG Ref.-no.: 240-10 EB

Назад в раздел