240-10 - Electronic potentiometer, 1 – 10 V for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V switching capacity of mains switch: AC 230 V ~ 50/60 Hz, max. 6 A for resistive loads - Quad Industry GmbH

Артикул: 240-10 Наименование: Electronic potentiometer, 1 – 10 V for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V switching capacity of mains switch: AC 230 V ~ 50/60 Hz, max. 6 A for resistive loads Производитель: JUNG Electronic potentiometer, 1 – 10 V for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V switching capacity of mains switch: AC 230 V ~ 50/60 Hz, max. 6 A for resistive loads Intended use *     Switching and brightness adjustment for lamps with operating devices with 1-10 V interface *     Installation in appliance box according to DIN 49073 Product characteristics *     Potentiometer with switching function for direct switching of ohmic or inductive loads *     Potentiometer with push-button function only in connection with pulse relays *     Basic brightness adjustable *     For potentiometers with a push-button function, switching via extensions is possible *     Protection of the 1-10 V interface in case of incorrect connection by means of integrated fine-wire fuse Approvals: VDE Technical data Control voltage: 0.7 ... 12 V Control current: max. 50 mA Fuse, type: F 0.5 A H 250 V Connection: screw terminals Terminals for: 2 x 2.5 mm2 or 1 x 4 mm2 Control cable: Type, cross-section and laying for 250 V lines (control voltage with basic insulation). Control and load wires may share a common cable, e.g. NYM J 5 x 1.5 mm2 . Approvals: VDE Version: with switch function Manufacturer: JUNG Ref.-no.: 240-10

Назад в раздел