2132.6UP - KNX Devices
Flush-mounted switch actuator, 2-gang
with satellite input
2 make contacts, 2 binary inputs
ETS product family: Output
Product type: Binary output - Quad Industry GmbH
Артикул: 2132.6UP
Наименование: KNX Devices
Flush-mounted switch actuator, 2-gang
with satellite input
2 make contacts, 2 binary inputs
ETS product family: Output
Product type: Binary output
Производитель: JUNG
|
|
KNX Devices
Flush-mounted switch actuator, 2-gang
with satellite input
2 make contacts, 2 binary inputs
ETS product family: Output
Product type: Binary output
Intended use
* Switching of electrical loads for AC 230 V mains voltage
* Installation in appliance box to DIN 49073
* Connection with enclosed terminals
Product characteristics
* Two binary inputs for potential-free contacts, usable as extension inputs for local operation
* Operation as NO or NC contacts
* Feedback function for each output
* An additional function for each output: logical, forced-position or time function
* Time functions: switch-on delay, switch-off delay, staircase lighting timer
* Supply via bus, no additional power supply necessary
Technical data
Output
Number: 2
Contact type: floating relay contacts (? contact)
Switch type: make contact
Max. switching voltage: AC 230 V ~
Max. switching current: 2 x 6 A at 230 V AC
Switching capacity
Incandescent lamps: 1200 W
HV halogen lamps: 1200 W
Capacitive load: AC 230 V, 6 A, max. 14 µF
Inductive transformers: 500 VA
Electronic transformers: 500 W
Terminals
Output cable: L, L1, L2, black, pink, grey, 1.5 mm2, length approx. 20 cm
Bus and control cable: KNX + red
KNX – black
binary input 1 green
GND white
binary input 2 yellow
GND brown
length approx. 33 cm, extendible to 5 m max.
Satellite input: depending on parameterization either as extension inputs for push-button local control of the actuator or as independent binary inputs acting on the bus
Dimensions: ? 53 mm, height 28 mm
Approvals: VDE
Manufacturer: JUNG
Ref.-no.: 2132.6 UP
|
Назад в раздел
|