ГлавнаяКаталогjung21321302130U
 

2130USBREG - KNX Devices USB data interface Rail mounting device, 2 rail units - Quad Industry GmbH

Артикул: 2130USBREG
Наименование: KNX Devices USB data interface Rail mounting device, 2 rail units
Производитель: JUNG




KNX Devices

USB data interface
Rail mounting device, 2 rail units

The USB data interface enables the coupling of a PC for the addressing, programming and diagnoses of KNX components. The power is fully supplied by the connected PC via the USB interface. This means that the USB data interface is no longer connected for the KNX if the USB cable is not plugged in. The device is only programmed locally with a physical address via the connected PC and therefore does not have a programming button or programming LED. The firmware of the USB data interface can be updated via a PC and is therefore safeguarded for future standards.
Note: The USB data interface is supported by ETS 3 software from version “a” upwards and by the PC operating systems Windows XP and Windows 7.
Connection: The connection to the KNX is carried out with the aid of the bus connecting terminal. The USB connection is carried out with a certified USB cable (1 x B plug required) with a max. length of 5 m.

Technical data
Power supply: via USB port of the PC
Connection
KNX: KNX bus connection block
USB port: USB socket, type B
Transfer rate: 9600 Baud
Transmission protocol: compatible with USB 1.1/2.0
Length of USB cable: max. 5 m
Ambient temperature: ?5 ... +45 °C
Storing temperature: ?25 ... +70 °C
Protection class: II
Mounting width: 36 mm (2 rail units)

Manufacturer: JUNG
Ref.-no.: 2130 USB REG

Назад в раздел