2098REGHE - KNX Devices DALI gateway Rail mounting device, 4 rail units with manual electronic operation and LED status indication ETS product family: Illumination Product type: Dimmer - Quad Industry GmbH

Артикул: 2098REGHE Наименование: KNX Devices DALI gateway Rail mounting device, 4 rail units with manual electronic operation and LED status indication ETS product family: Illumination Product type: Dimmer Производитель: JUNG KNX Devices DALI gateway Rail mounting device, 4 rail units with manual electronic operation and LED status indication ETS product family: Illumination Product type: Dimmer Intended use *     Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast *     Installation on DIN rail according to EN 60715 in distribution boxes Product characteristics *     Control of up to 64 DALI devices in up to 32 groups *     Individual, group or central addressing *     Suitable for operation in emergency lighting systems *     16 light scenes *     Effect control for dynamic lighting effects or colour games *     Read out DALI device state via KNX, e.g. brightness or luminaire error *     Manual operation of the DALI groups *     Restraint *     Feedback of switching state and brightness value in bus and manual mode *     Collective feedback *     Central switching function *     Disabling function for each DALI group *     Separate ON and OFF delay *     Staircase lighting timer with pre-warning function *     Corridor function: when combined with motion detectors, reduced continuous lighting, if no motion is detected *     Online or offline project planning of the DALI devices with ETS plug-in *     Short-circuit protection *     Surge protection *     Overload protection *     Operating hours counter *     Signal of the global switching status of the DALI devices, e.g. to switch off the mains voltage of the DALI devices to avoid standby losses *     An individual DALI device can be exchanged during operation without software Technical data Rated voltage: AC 110 ... 240 V ~, 50/60 Hz Rated voltage DC: DC 110 ... 240 V Power loss: max. 3 W Ambient temperature: ?5 ... +45 °C Storage/transport temperature: ?25 ... +70 °C Rated voltage DALI: DC 16 V Number of DALI devices: max. 64 DALI transmission rate: 1.2 kbit/s DALI protocol: EN 62386 Cable type: Sheathed cable 230 V, e,g. NYM Cable length DALI with 1.5 mm2: max. 300 m with 1.0 mm2: max. 238 m with 0.75 mm2: max. 174 m with 0.5 mm2: max. 116 m Mounting width: 72 mm (4 rail units) Connection, power supply and DALI: screw terminals single wire: 0.5 ... 4 mm2 stranded without ferrule: 0.5 ... 4 mm2 stranded with ferrule: 0.5 ... 2.5 mm2 Rated voltage KNX: DC 21 ... 32 V SELV Power consumption KNX: typical 150 mW Connection, KNX: terminal Manufacturer: JUNG Ref.-no.: 2098 REGHE

Назад в раздел