1208REG - Power unit for rail mounting - Quad Industry GmbH
 Power unit for rail mounting Intended use * Manual or automatic switching of light in stairways * Installation in distribution boxes on DIN rail according to EN 60715 * Switch-on via pulse unit or push-buttons Product characteristics * Adjustable shut-off delay * Electronic overload protection for the control input Four different operating modes can be set: * Automatic function without switch-off pre-warning * Automatic function with switch-off pre-warning * Light switched ON continuously * Light switched OFF continuously To realise a staircase automatic switch circuit upgrading of 3- or 4-wire staircase lighting systems with automatic switches. A staircase automatic switch circuit is consisting of pulse unit, centre plate or automatic switch and power unit. Max. 16 pulse units. The pulse unit ref.-no. 1208 UI together with the power unit ref.-no. 1208 REG is the only admissible combination. Technical data Rated voltage: AC 230 V ~, 50 Hz Power consumption: approx. 1 W Permissible current for control input: max. 40 mA Mounting width: 18 mm (1 rail unit) Operating temperature: +5 ... +45 °C Switching capacity: 16 A / AC 250 V ~ Incandescent lamps: 2300 W HV halogen lamps: 2300 W Fluorescent lamps parallel compensated: 920 W non-compensated: 1200 VA lead-lag circuit: 2300 W Electronic transformers: 1500 W Inductive transformers: 1000 VA Electronic ballast: depending on type Minimum load: 100 mA Duty cycle: 100 % Radio interference suppression: according to EN 55 014 Total length of control cable: max. 100 m Connection: screw terminals Terminals for: 2 x 2.5 mm2 or 1 x 4 mm2 Shut-off delay: approx. 10 s ... 15 min Shut-off delay tolerance: ± 20 % Max. number of pulse units: 16 Operation modes: OFF Automatic without warning Automatic with warning ON Approvals: VDE Manufacturer: JUNG Ref.-no.: 1208 REG |
Назад в раздел
Клиенты
   
|
Quad Industry GmbH
GER + 49 (30) 994-049-88 E-mail: sales@quad-industry.com |