ÃëàâíàÿÊàòàëîãhoneywell30230243
 

3024 - High Resolution VRS Sensor, 9,5 mm [0.375 in] M12 diameter, 55 Vp-p, -40 ?C to 107 ?C [-40 ?F to 225 ?F], 36 DP (module 0.70) or coarser, 40 kHz, 32 mm [1.25 in] approx. length || 3024 - Quad Industry GmbH

Àðòèêóë: 3024
Íàèìåíîâàíèå: High Resolution VRS Sensor, 9,5 mm [0.375 in] M12 diameter, 55 Vp-p, -40 ?C to 107 ?C [-40 ?F to 225 ?F], 36 DP (module 0.70) or coarser, 40 kHz, 32 mm [1.25 in] approx. length || 3024
Ïðîèçâîäèòåëü: Honeywell





Description

High Resolution VRS sensors are designed for use in applications where precise timing pulse is required, and/or fine pitch gears are used. Proper alignment of the sensor is required.

Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation.

A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding, which is attached to the output terminals.

The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p).

One complete waveform (cycle) occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope.

Honeywell also offers VRS sensors for general purpose, high output, power output, high temperature and hazardous location applications.

Features
  • Self-powered operation
  • Direct conversion of actuator speed to output frequency
  • Simple installation
  • No moving parts
  • Designed for use over a wide range of speeds
  • Adaptable to a wide variety of configurations
  • Customized VRS products for unique speed sensing applications
  • Housing diameters: 5/8 in (M16), 3/8 in (M12)
  • Housing materials/style: stainless steel threaded
  • Terminations: MS3106 connector, prleaded
  • Output voltages: 17 Vp-p to 170 Vp-p

Potential Applications
  • Engine RPM (revolutions per minute) measurement on aircraft, automobiles, boats, buses, trucks and rail vehicles
  • Motor RPM measurement on drills, grinders, lathes and automatic screw machines
  • Motor RPM measurement on precision camera, tape recording and motion picture equipment
  • Process speed measurement on food, textile, paper, woodworking, printing, tobacco and pharmaceutical industry machinery
  • Motor speed measurement of electrical generating equipment
  • Speed measurement of pumps, blowers, mixers, exhaust and ventilating fans
  • Flow measurement on turbine meters
  • Wheel-slip measurement on autos and locomotives
  • Gear speed measurement

Product Specifications
Diameter 9,5 mm [0.375 in]
Available Metric Thread M12
Test Condition Specifications Surface Speed = 25 m/s [1000 in/s], Gear = 20 DP [Module 1.27), Air Gap = 0.127 mm [0.005 in], Load Resistance = 100 kOhm
Output Voltage (Peak to Peak) Min. 55 Vp-p
Pole Piece Shape and Size Chisel, 0,25 mm [0.010 in] Width
Operating Temperature -40 °C to 107 °C [-40 °F to 225 °F]
Gear Pitch Range 36 DP (Module 0.70) or Coarser
Operating Frequency 40 kHz
Inductance 75 mH
Coil Resistance 75 Ohm to 330 Ohm
Surface Speed 0,38 m/s [15 in/s]
Optimum Actuator 32 DP (Module 0.80) Ferrous Metal Gear
Mounting Thread 3/8-24 UNF-2A
Vibration MIL-STD 202F, Method 204D
Material Stainless Steel Threaded
Housing Length 32 mm [1.25 in]
Termination 24 AWG PVC-Insulated Leads, 610 mm [24 in]
Weight 28 g [1.0 oz]
Series Name High Resolution


Íàçàä â ðàçäåë