SDP8600-002 - SDP8600 Series Optoschmitt Detector, Side-looking Plastic Package || SDP8600-002 - Quad Industry GmbH
Артикул: SDP8600-002
Наименование: SDP8600 Series Optoschmitt Detector, Side-looking Plastic Package || SDP8600-002
Производитель: Honeywell
|
|
| Description | | The SDP86XX series is a family of single chip Optoschmitt IC detectors molded in a side-looking black plastic package to minimize the effect of visible ambient light. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with a 10 kOhm (nominal) pull-up resistor. Output rise and fall times are independent of the rate of change of incident light. Detector sensitivity has been internally temperature compensated. Flexibility of use is enhanced by a choice of three different lead configurations, in-line (SDP8601/8611), 0.05 in (1.27 mm) offset pin circle (SDP8600/8610) and 0.10 in (2.54 mm) offset center lead (SDP8602/8612). Device Polarity: Buffer - Output is HI when incident light intensity is above the turn-on threshold level. Inverter - Output is LO when incident light intensity is above the turn-on threshold level. | | Features | - Side-looking plastic package
- 55 ° (nominal) acceptance angle
- Wide sensitivity ranges
- TTL/LSTTL/CMOS compatible
- Buffer (SDP8600/8601/8602) or inverting (SDP8610/8611/8612) logic available
- Three different lead spacing arrangements
- Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes
|
|
| | Product Specifications | | Series Name | SDP8600 | | Angular Response (Degree) | 50 | | Turn-on Threshold Irradiance | 1.2 mW/cm² maximum | | Output | 10 kOhm Pull-up | | Output Logic | Buffer | | Package Type | Side-Looking | | Package Components | Plastic | | Package Color | Black | | Power Dissipation | 100 mW | | Operating Temperature | -40 °C to 85 °C [-40 °F to 185 °F] | | Hysteresis (H) | 5% to 30% | | Supply Voltage | 12.0 Vdc | | High Level Output Voltage | 2.4 V minimum | | Low Level Output Voltage | 0.4 V maximum | | Short Circuit Output Current | -20 mA to -100 mA | | Internal Pull-up Resistor | 5.0 kOhm min., 10.0 kOhm typ., 20.0 kOhm max. | | Output Rise Time | 60 ns | | Output Fall Time | 15 ns | | Propagation Delay Low-HighHigh-Low | 5.0 µs | | Clock Frequency | 100 kHz | | Irradiance | 25 mW/cm² | | Comment | Output is HI when incident light intensity is above the turn-on threshold level. | | Availability | Global | | Supply Current max. | 12 mA @ 25 °C | | Operate Point | 62 µW/cm² @ 25 °C | | Output Current | 18 mA max. |
|
Назад в раздел
|
