947-TSY-2D-001-130E - Series 940-F/947, Retroreflex, No dead zone, 3000 mm [118.0 in] scan distance, Plastic M30, Prewired 2 m, switching output PNP, adjustment potentiometer || 947-TSY-2D-001-130E - Quad Industry GmbH
Àðòèêóë: 947-TSY-2D-001-130E
Íàèìåíîâàíèå: Series 940-F/947, Retroreflex, No dead zone, 3000 mm [118.0 in] scan distance, Plastic M30, Prewired 2 m, switching output PNP, adjustment potentiometer || 947-TSY-2D-001-130E
Ïðîèçâîäèòåëü: Honeywell
|
|
| Description | | The 947 retroreflex series are industrial controls performing detection by using an ultrasonic beam. They are the solution whenever photoelectric sensors cannot be used: dusty environments, sunlight, rain, impossibility to place a reflector, dark rooms, frost, etc. Their small size and high sealing allow to place them virtually anywhere. The 947 retroreflex series work by detecting a fixed target permanently (test target): this can be any surface with correct ultrasonic reflexion capability: wall, post, ground, ceiling... Any target blocking the ultrasonic beam triggers the sensor, even things formerly impossible to detect with Ultrasonic technology are reliably detected! For example, people, cars, soft or foamy objects, fabric, etc, are detected even in the dead zone! 947 retroreflex series are available with PNP open collector output, potentiometer adjustment, M18 or M30 plastic housing with 2m cable. Three models are available, depending on the range for placing the test target. | | Features | - Three scan ranges:
0 m to 0,6 m [0 ft to 1.96 ft]
0 m to 1,5 m [0 ft to 4.92 ft]
0 m to 3,0 m [0 ft to 19.68 ft] - Plastic housing M18 (for 0,6 m [1.96 ft] and
1,5 m [4.92 ft] models), M30 (for 3,0 m [19.68 ft] models) - Chemical-resistant epoxy heads
- High sealing IP67
- Pre-leaded 2 m [78.75 in]
- Synchronising/hold input: To avoid mutual interference from several sensors, they are very simply synchronised by connecting their synchronising/hold input (pin 4) together. If the measure needs to be stopped, connect the synchronising/hold input to the ground, the output stays stable.
- Switching output PNP open collector: Adjustment by potentiometer
- Microprocessor controlled
- Temperature compensation
|
| | Typical Applications | - Bottle counting
- Car counting
- Parking management
- People counting
- Photographic film processing
- Web break detection
|
| | Product Specifications | | Sensing Range | 0 mm to 3000 mm [12.0 in to 118.0 in] | | Range Type | Long range > 2,0 m [80.0 in] and up | | Min. Sensing Distance of Test Target | 600 mm [23.62 in] | | Supply Voltage | 19 Vdc to 30 Vdc | | Beam Angle | 8° | | Oscillating Frequency | 130 KHz | | Integrated Temperature Compensation | Yes | | Output Type | Retroreflex mode|Switching 1 x PNP | | Switching Output Type | Normally Open (N.O.) | | Response Time | 120 ms | | Max. Switching Frequency | 1 Hz | | Adjustment Method | Potentiometer | | Operating Temperature | -15 °C to 70 °C [5 °F to 158 °F] | | Storage Temperature | -25 °C to 75 °C [-13 °F to 167 °F] | | Maximum Output Current | 500 mA | | Indicators | 1 LED | | Additional Inputs/Outputs | Hold/Synchronisation | | Current Consumption | 35 mA maximum | | Circuit Protection | Reverse Polarity, voltage spikes on supply and output lines, short circuit on switching output | | Housing Style | M30 plastic | | Housing Material | Polyethylenterephtalat | | Sealing | IP67 | | Mounting | 2 x M30 plastic nuts 36 mm | | Sensing Face Material | Epoxy | | Termination Type | Pre-wired 2 m [78.74] | | Availability | Global | | UNSPSC Code | 41111960 | | UNSPSC Commodity | 41111960 Ultrasonic sensor | | Series Name | 940-F/947 |
|
Íàçàä â ðàçäåë
|
