ГлавнаяКаталогhoneywellHRSHRS1HRS10
 

HRS100SWAB090 - HRS100 Series Hall-effect rotary position sensor, slotted shaft, flying wire leads, 90° electrical angle || HRS100SWAB090 - Quad Industry GmbH

Артикул: HRS100SWAB090
Наименование: HRS100 Series Hall-effect rotary position sensor, slotted shaft, flying wire leads, 90° electrical angle || HRS100SWAB090
Производитель: Honeywell





The HRS100 Series uses Hall-effect technology to provide angular position information. The use of magnetically coupled information, in place of a mechanical wiper assembly, provides long life and a cost-effective solution for harsh environments that include temperature, vibration, dither, moisture and dirt.

The HRS100 Series is packaged in a metal housing with a 9,5 mm [0.375 in] diameter bushing and a 6,35 mm [0.25 in] diameter slotted shaft. Termination is either solder lug or flying wire leads.

  • Solid-state Hall-effect technology: Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms
  • Choice of termination: Provides application flexibility
  • 10 M cycle product life (typical): Provides long life in the application

Transportation:

  • Position and movement detection of pedals, throttles, gear shift, levers, steering, linkages, and hitches (off-road vehicles and industrial/ construction/agricultural vehicles/equipment)
  • Tilt/trim position (boat engines)

Industrial:

  • Material handling equipment (forklifts, robotics)
Product Specifications
Package Type stainless steel shaft and brass bushing
Supply Voltage 5 Vdc ± 10%
Output Type sink/source 2 mA
Termination Type flying wire leads
Operating Temperature -40 °C to 85 °C [-40 °F to 185 °F]
Storage Temperature 105 °C [221 °F] max.
Output Voltage 5 % to 95 % of applied Vdd, approx (programmable)
Linearity (% of Span) ± 2%
Mechanical Angle of Rotation 90 ° ±2°
Output Current (max.) 2 mA max.
Bushing Type 9.52 mm [0.375 in] FMS, excludes C-ring
Rotational Cycles 10 million
Rotational Torque 0.014 N m [2.0 in oz] (max. at 25 °C)
Stop Torque 0.56 N m [5 in lb]
Push Out 9.1 kg [20 lb] min.
Pull Out 4.5 kg [10 lb] min.
Overvoltage Protection 18 Vdc max.
EMI 30 V/m, 10 kHz to 1000 MHz at 3 m
Series Name HRS100


Назад в раздел