RTY060HVNAX - RTY Series, single output style, 60° (±30°) operating range, 10 Vdc to 30 Vdc supply voltage, North American pinout style, 0.5 Vdc (left) 4.5 Vdc (right) output voltage || RTY060HVNAX - Quad Industry GmbH

Артикул: RTY060HVNAX Наименование: RTY Series, single output style, 60° (±30°) operating range, 10 Vdc to 30 Vdc supply voltage, North American pinout style, 0.5 Vdc (left) 4.5 Vdc (right) output voltage || RTY060HVNAX Производитель: Honeywell Description The RTY Series Hall-Effect Rotary Position Sensors provide angle monitoring in harsh transportation and industrial applications at a competitive cost. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes a magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, and the permanent magnet, is sealed in an IP67-qualified rugged package for durability in most harsh environments. Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270° and 360°) are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Although most applications require no lever, a lever version is available. The lever may allow customers to reduce the number of mechanical linkages required for their application, which may reduce the cost of the overall customer solution. No brackets are necessary. Honeywell’s industry-leading capabilities in research and development provide the customer with known quality and support. Features 35 M cycle product life: Provides long life in the application Solid-state Hall-effect technology: Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms Rugged IP67-sealed package with integral connector: Allows for use in harsh environments Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit: Provides protection against installation errors and frequencies in the environment Industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and compact package: Provides drop-in replacement Eight operating ranges up to 360°: Provides flexibility in multiple applications, allowing OEMs the range of travel needed for the application Potential Applications TRANSPORTATION Position and movement detection (pedals, throttles, gear shift, levers, steering, linkages, and hitches in trucks, buses, off-road vehicles, cranes, and industrial/construction/agricultural vehicles and equipment): May be used to sense angular position of these vital components to enhance fuel economy, equipment/engine performance, and safety Suspension/Kneeling Position (Buses, Trucks): May be used to sense angular travel of the suspension system. Accurate sensing validates the correct height for the application’s system requirements, potentially aiding vehicle ingress/egress (liability), trailer height for warehouse docking (faster turns and liability), and suspension performance monitoring (diagnostic check) Tilt/trim position (boat engines, tilling equipment): May be used to sense equipment position which helps provide accurate reporting so that the operator can maintain peak performance and protect against equipment damage INDUSTRIAL Valve control: May be used to sense valve position to regulate flow which allows facilities to achieve greater throughputs HVAC damper control: May be used to sense damper position to regulate airflow, providing system efficiency and facility occupant comfort Product Specifications Output Style single Operating Range 60° (±30°) Output Signal 0.5 V to 4.5 V non-ratiometric Output Signal Delay 4 ms typ. Supply Voltage 10 Vdc to 30 Vdc Current Consumption 30 mA max. Accuracy ±1.6% Linearity ±1.0% Life 35 M Reverse Polarity Protection Yes EMC Exceeds CE requirements. Termination AMP super seal connector Shaft Shape flat Mounting Hole oval Lever without lever Operating Temperature -40 °C to 125 °C [-40 °F to 257 °F] Storage Temperature -40 °C to 125 °C [-40 °F to 257 °F] Sealing IP67 Availability Global Series Name RTY Weight Per Unit 50 g [1.7 oz]

Назад в раздел