V5047A1021/U - Two-way, Globe, 1 1/2 in, (Female) NPT, 30 Cv, Water or Glycol or Steam - Quad Industry GmbH
Артикул: V5047A1021/U
Наименование: Two-way, Globe, 1 1/2 in, (Female) NPT, 30 Cv, Water or Glycol or Steam
Производитель: Honeywell
|
|
Overview Control high pressure steam, liquids, air or noncombustible gases where positive final shutoff is not required. Features - Q5001D Valve Linkage and Modutrol motor required for operation.
- Suitable for two-position, floating, or proportioning control, depending on the motor and controller used.
- Provide high capacity with minimum pressure drop.
- Pipe sizes include 1, 1-1/4, 1-1/2, and 2 inches.
- Straight-through construction and threaded end connections.
- Cast iron body with stainless steel trim.
- Plug provides equal percentage characteristic of flow.
- V-port for either throttling or on-off service.
- Replaceable seat rings screw into body.
- Spring-loaded Teflon cone packing for minimum friction.
Product Specifications - Dimensions (in.)
- 6 1/4 in. high x 3 1/8 in. wide x 5 1/2 in. deep
- Dimensions (mm)
- 158 mm high x 79 mm wide x 139 mm deep
- Maximum Safe Operating Pressure (psi)
- 150 psi water, 100 psi steam
- Maximum Safe Operating Pressure (kPa)
- 1034 kPa water, 690 kPa steam
- Used With
- Q5001/Modutrol IV Motor
- Comments
- Double seated
- Ambient Temperature Range (F)
- 32 F to 337 F
- Ambient Temperature Range (C)
- 0 C to 170 C
- Connection Type
- Female NPT
- Body Pattern
- Two-way
- Pipe Size (inch)
- 1 1/2 in.
- Pipe Size (DN)
- DN40
- Bonnet Size (in.)
- 1-3/8 in.
- Capacity (Cv)
- 30 Cv
- Capacity (Kv)
- 25.7 kvs
- Valve Action
- Stem down to close
- Valve Type
- Globe Valve
- Controlled Fluid
- Chilled or hot water with up to 50% Glycol or Steam. Not for use with fuels.
- Materials (Body)
- Cast Iron
- Materials (Seat)
- Stainless Steel
- Materials (Stem)
- Stainless Steel
- Materials (Cartridge)
- Stainless Steel
- Flow Characteristic
- Equal Percentage
- Actuation
- Must be purchased separately
- Static Pressure Rating (psi)
- Meets ANSI 125 Standard
- Static Pressure Rating (kPa)
- Meets ANSI 125 Standard
- ANSI/ASME Rating
- 125
- Stem Travel (in.)
- 9/16 in.
- Stem Travel (mm)
- 14 mm
- Bonnet Size (mm)
- 35 mm
- Materials (Packing)
- Spring loaded non-adjustable Teflon V-ring
- Leakage
- 0.005 of Cv
| | | | |
|
Назад в раздел
|