The humidity resistant, Fan Coil Valve Actuators are used in conjunction with VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors.
Features
Compact construction for easy installation.
Fits under the cover of most baseboard convectors with actuator fitted to valve body.
One-button, quick release. Secure 3-point, metal latch to valve body.
Spring return operation.
Stainless steel case and aluminum cover. Rust-proof nickel-plated motors available.
Line or low voltage, rust-resistant motors.
Manual opener for installation and valve operation on power failure.
Valve returns to automatic position when power is restored.
Actuator may be reinstalled or serviced without draining the system or disassembling the valve.
Slotted conduit hole for faster wiring.
Product Specifications
Application
HVAC
Dimensions (in.)
2 3/8 in. high, 3 1/2 in. wide, 2 3/8 in. wide
Dimensions (mm)
62 mm high, 88 mm wide, 60 mm deep
Used With
2-way NC VU valve body (VU53)
Materials
SS case, Aluminum cover, Ni-plated motor
Comments
For controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors, Nickel plated motor for added humidity resistance
Frequency
60 Hz
Approvals, Canadian Standards Association
Certified C/US File No. LR1322
Electrical Connections
Leads
Supply Voltage
120V
Power Consumption
Driving-- 6 Watts
Ambient Temperature Range (F)
34 F to 125 F ambient at 200 F Fluid
Ambient Temperature Range (C)
1 C to 52 C ambient at 93 C Fluid
Internal Auxiliary Switch
0
Fluid Temperature (C)
94 C
Fluid Temperature (F)
200 F
Actuator Type
Valve
Control Signal
Two position, SPST
Fail Safe Mode
Spring Return
Stroke (in.)
22 deg.
Timing, Nominal
Driving @ 60 Hz (sec)-- 15 sec maximum
Spring Return Timing
Nominal-- 4 sec
Maximum Differential Pressure Ratings (Close-off) (psi)
Depends on Cv rating of valve
Maximum Differential Pressure Ratings (Close-off) (kPa)
