| | SIMATIC DP, INTERFACE MODULE IM151-3 PROFINET FOR ET200S; TRANSMISS. RATE UP TO 100MBIT/S MAX. OF 63 POWER, ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA RJ45 INCL. TERMINATING MODULE |
| |
| General information |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0301H |
| Supply voltage |
| Mains buffering |
| Mains buffering, min. | 20 ms |
| Input current |
| from supply voltage 1L+, max. | 200 mA |
| Power losses |
| Power loss, typ. | 2 W |
| Address area |
| Addressing volume |
| Outputs | 256 byte |
| Inputs | 256 byte |
| Interfaces |
| Supports protocol for PROFINET IO |
| Automatic detection of transmission speed | Yes |
| Transmission rate, max. | 100 Mbit/s; full duplex |
| Services | PROFINET IO (Device), TCP/IP Protocol Suite: Network management functions, network diagnostics (SNMP, MIB-2), ping, arp, PROFINET V2.0 |
| RJ45 | Yes |
| PROFIBUS DP |
| Transmission procedure | 100BASE-TX |
| Protocols |
| Supports protocol for PROFINET IO | Yes |
| Interrupts/diagnostics/status information |
| Alarms |
| Alarms | Yes |
| Diagnostic messages |
| Diagnostic functions | Yes |
| Diagnostics indication LED |
| Bus fault BF (red) | Yes |
| Group error SF (red) | Yes |
| Monitoring 24 V voltage supply ON (green) | Yes |
| Connection to network LINK (green) | Yes |
| Transmit/receive RX/TX (yellow) | Yes |
| Galvanic isolation |
| between backplane bus and electronics | No |
| between supply voltage and electronics | No |
| between Ethernet and electronics | Yes |
| Permissible potential difference |
| between different circuits | 75 VDC / 60 VAC |
| Isolation |
| Isolation checked with | 500 V DC |
| Dimensions |
| Width | 45 mm |
| Height | 119.5 mm |
| Depth | 75 mm |
| Weight |
| Weight, approx. | 135 g |
| Status | Mar 12, 2012 |
