| SIMATIC DP, POWER MODULE PM 148 FOR ET 200X 4 DO, 24 24V DC/2 A WITH LOAD VOLTAGE INPUT, WITH DIAGNOSIS BY CHANNEL |
|
Supply voltage |
Load voltage 2L+ |
Rated value (DC) | 24 V |
Short-circuit protection | Yes |
Reverse polarity protection | No |
Input current |
from load voltage 2L+ (without load), max. | 60 mA |
from backplane bus 5 V DC, max. | 40 mA |
Power losses |
Power loss, typ. | 2.5 W |
Digital outputs |
Number/binary outputs | 4 |
Output current |
for signal "1" rated value | 2 A; at 24 V DC |
for signal "0" residual current, max. | 0.5 mA |
Switching frequency |
with resistive load, max. | 100 Hz |
with inductive load, max. | 0.5 Hz |
on lamp load, max. | 1 Hz |
Aggregate current of outputs (per group) |
all mounting positions |
up to 20 °C, max. | 6 A |
up to 55 °C, max. | 4 A |
Cable length |
Cable length unshielded, max. | 30 m |
Interrupts/diagnostics/status information |
Diagnostic messages |
Wire break | Yes; channel by channel |
Short circuit | Yes; channel by channel |
Galvanic isolation |
between backplane bus and all other circuit components | Yes |
Dimensions |
Width | 87 mm; Width module 60 mm |
Height | 165 mm |
Depth | 67 mm; incl. connector |
Status | Feb 27, 2012 |