| SIMATIC DP, ELECTRONIC MODULE FOR ET200PRO 4 AI U HIGH FEATURE, +-10V; 0...10V; +-5V; 1...5V; CHANNEL DIAGNOSTICS; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY |
|
Supply voltage |
Load voltage L+ |
Rated value (DC) | 24 V |
Reverse polarity protection | Yes; against destruction |
Input current |
from backplane bus 3.3 V DC, max. | 10 mA |
Power losses |
Power loss, typ. | 1.1 W |
Address area |
Address space per module |
Address space per module, max. | 8 byte |
Analog inputs |
Number of analog inputs | 4 |
permissible input voltage for voltage input (destruction limit), max. | 35 V |
Cycle time (all channels) max. | 267 ms |
Input ranges |
Voltage | Yes |
Current | No |
Thermocouple | No |
Resistance thermometer | No |
Resistance | No |
Input ranges (rated values), voltages |
1 to 5 V | Yes |
-10 V to +10 V | Yes |
-5 V to +5 V | Yes |
Cable length |
Cable length, shielded, max. | 30 m |
Analog value creation |
Measurement principle | integrating |
Integrations and conversion time/ resolution per channel |
Resolution with overrange (bit including sign), max. | 15 bit; at +/- 10 V, at +/- 5 V; 14 bits at 0 to 10 V, at 1 to 5 V |
Integration time, ms | 20 / 16,667 |
Interference voltage suppression for interference frequency f1 in Hz | 50/60 Hz |
Conversion time (per channel) | 67 ms |
Smoothing of measured values |
Parameterizable | Yes |
Step: None | Yes; 1 x cycle time |
Step: low | Yes; 4 x cycle time |
Step: Medium | Yes; 16 x cycle time |
Step: High | Yes; 64 x cycle time |
Errors/accuracies |
Linearity error (relative to input area) | +/- 0.01 % |
Temperature error (relative to input area) | +/- 0.002 %/K |
Crosstalk between the inputs, min. | -50 dB |
Repeat accuracy in settled status at 25 °C (relative to input area) | +/- 0.025 % |
Operational limit in overall temperature range |
Voltage, relative to input area | +/- 0.15 % |
Basic error limit (operational limit at 25 °C) |
Voltage, relative to input area | +/- 0.1 % |
Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency |
Series mode interference (peak value of interference < rated value of input range), min. | 50 dB |
common mode voltage (USS < 2.5 V) , min. | 70 dB; Interference voltage < 5 V |
Interrupts/diagnostics/status information |
Diagnostic messages |
Wire break | Yes; at 1 to 5 V |
Diagnostics indication LED |
Group error SF (red) | Yes |
Galvanic isolation |
Galvanic isolation analog inputs |
between the channels | No |
between the channels and the backplane bus | Yes |
Permissible potential difference |
between inputs and MANA (UCM) | 5 Vpp AC |
between MANA and M internally (UISO) | 500 V DC |
Isolation |
Isolation checked with | 500 V DC |
Dimensions |
Width | 45 mm |
Height | 130 mm |
Depth | 35 mm |
Weight |
Weight, approx. | 150 g |
Status | Mar 12, 2012 |