6ES7138-4DB00-0AB0 - ET 200S 1SSI 25Bit/2MHz (siemens) - Quad Industry GmbH

Артикул: 6ES7138-4DB00-0AB0
Наименование: ET 200S 1SSI 25Bit/2MHz (siemens)
Производитель: Siemens


Наименование продукта
ET 200S 1SSI 25Bit/2MHz
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
1998-12-21 2002-07-02
Manuals weitere>>
ET 200S Distributed I/O System  2004-09-14
SIMATIC DP, ELECTRONIC MODULE F. ET 200S, 1 SSI 25BIT/1MHZ 15MM WIDE MODULE FOR CONN. OF ABSOLUTE ENCODERS WITH SSI INTERFACE SYNCHRONOUS SERIAL INTERFACE WITH DI AND COMPAR. VALUE
Supply voltage
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 34 mA
from backplane bus 3.3 V DC, max. 10 mA
Encoder supply
Absolute encoder (SSI) encoder supply
Absolute encoder (SSI) Yes
Output voltage L+ (-0.8 V)
Output current, max. 500 mA
Short-circuit protection Yes
Power losses
Power loss, typ. 0.8 W
Digital inputs
Number/binary inputs 1
Functions Trigger for unlatching the current actual value, e.g. for length measurement
Input characteristic curve acc. to IEC 61131, Type 2 Yes
Input voltage
Rated value, DC 24 V
for signal "0" 11 to 30 V DC
for signal "1" -30 to +5 V DC
Input current
for signal "0", max. (permissible quiescent current) 2 mA
for signal "1", typ. 9 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", max. 300 µs
Cable length
Cable length, shielded, max. 600 m
Cable length unshielded, max. 32 m
Encoder
Number of connectable encoders, max. 1
Connectable encoders
Absolute encoder (SSI) Yes
2-wire sensor Yes
Encoder signals, absolute encoder (SSI)
Telegram length 13, 21, 25 bit
Binary code 1
Gray code 1
Cable length, shielded, max. 320 m; 320 m at 125 kHz, 160 m at 250 kHz, 60 m at 500 kHz, 20 m at 1 MHz, 8 m at 2 MHz, twisted in pairs and shielded
Monoflop time settable: 16/32/48/64 µs
Interrupts/diagnostics/status information
Diagnostics indication LED
Description 1 green LED for status indication of comparator No.1
Group error SF (red) Yes
Status indicator digital input (green) Yes
Status indicator backward counting (green) Yes
Status indicator forward counting (green) Yes
Parameter
Remark 8 bytes
Galvanic isolation
Galvanic isolation counter
between the channels and the backplane bus Yes
between the channels and the load voltage L+ No
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weight
Weight, approx. 40 g
Status Mar 12, 2012

Назад в раздел